Product Description
Key Features
- Digital output configuration: 4 parameterizable Triac digital outputs with current-sourcing operation; current-sinking operation is not supported.
- Output capacity: Rated output current is 2 A per channel and 8 A per module. With resistive load, the maximum is 2 A, or max. 4 A according to the manual.
- Supply and operating modes: Rated supply is 230 V AC at 47 … 63 Hz. Supported modes include DQ, DQ with energy-saving function, phase control, half-wave, and full-wave.
- Diagnostics and protection: Channel-by-channel open-circuit detection, supply-voltage monitoring, group error, diagnostic information, and channel and module LED indications are supported. Short-circuit and overload protection are not provided; external fusing is necessary.
- Connection and installation: The module is suitable for BU type U0. One-wire and 2-wire connections use BU type U0; a 3-wire connection uses BU type U0 + Potential distributor module.
- Identity and lifecycle: SIPLUS ET 200SP DQ 4×24..230VAC TX is based on 6ES7132-6FD00-0CU0, has color code CC20 and conformal coating, and is an Active Product.
Applications
- Digital output switching: The module provides 4 Triac digital outputs for switching AC loads.
- Phase control: The module supports phase control with a control area of 8.5 … 100% of the phase angle.
Technical Summary
| Product type designation | DQ 4×24 … 230 V AC/2 A HF |
|---|---|
| Digital outputs | 4; Triac; parameterizable |
| Rated supply | 230 V AC; 47 … 63 Hz |
| Output current | 2 A rated per channel; 8 A maximum per module |
| BaseUnit | BU type U0 |
| Configuration | STEP 7 TIA Portal configurable/integrated from version see entry ID: 109746275 |
| Firmware update | Possible |
| Temperature | -40…+70 °C; OT4 with ST1/2 (+85 °C for 10 minutes) |
| Protection | No short-circuit or overload protection; external fusing necessary |
| Lifecycle | Active Product |
Frequently Asked Questions
What is the exact order number and product identity?
The exact order number is 6AG2132-6FD00-4CU0. The product type designation is DQ 4×24 … 230 V AC/2 A HF, SIPLUS ET 200SP DQ 4×24..230VAC TX.
Which BaseUnit is required for this module?
It is suitable for BU type U0. One-wire and 2-wire connections use BU type U0; a 3-wire connection uses BU type U0 + Potential distributor module.
What firmware and engineering information should be checked?
FW update is possible. The module is configurable/integrated in STEP 7 TIA Portal from the version identified by entry ID: 109746275.
Does the module include short-circuit and overload protection?
It is without short-circuit and overload protection. External fusing is necessary; for overload protection, a miniature fuse with 10 tripping current and a "quick response" tripping characteristic must be provided in the module supply.
