Product Description
Key Features
- Exact drive identity: SIPLUS G120 PM240-2 with product version FSA 1.5 kW, design FSA, based on 6SL3210-1PE14-3UL1.
- Supply and overload ratings: 380-480 V 3 AC +10/-10% at 47-63 Hz; low overload power is 1.5 kW and high overload power is 1.1 kW.
- Overload capability: Low overload: 150% for 3 s and 110% for 57 s, each with a cycle time of 300 s; high overload: 200% for 3 s and 150% for 57 s, each with a cycle time of 300 s.
- Output and performance: Maximum output current is 6.2 A, pulse frequency is 4 kHz, and efficiency is 0.96.
- Integrated protection and braking: The drive has an integrated braking chopper, plus undervoltage, overvoltage, overload, ground-fault, short-circuit, stall, blocked-rotor, and motor and converter temperature protection.
- Physical configuration and lifecycle: FSA design, IP20 protection, 196 x 73 x 165 mm (H x W x D), with conformal coating; Active Product. Without CU and operating unit; released as of CU FW version V4.7 HF8.
Technical Summary
| Product type | PM240-2 |
|---|---|
| Product version | FSA 1.5 kW |
| Based on | 6SL3210-1PE14-3UL1 |
| Input voltage | 380-480 V 3 AC +10/-10% 47-63 Hz |
| Low overload power | 1.5 kW |
| High overload power | 1.1 kW |
| Maximum output current | 6.2 A |
| Pulse frequency | 4 kHz |
| Protection | IP20 |
| Lifecycle | Active Product |
| Configuration exclusion | Without CU and operating unit |
Frequently Asked Questions
What is the exact product identity?
It is Siemens SIPLUS G120 PM240-2, product version FSA 1.5 kW, order number 6AG1210-1PE14-2UL1.
What supply rating should be confirmed for this drive?
The supply is 380-480 V 3 AC +10/-10% at 47-63 Hz.
What overload ratings should be checked?
Low overload is 1.5 kW: 150% for 3 s and 110% for 57 s. High overload is 1.1 kW: 200% for 3 s and 150% for 57 s; each value uses a 300 s cycle time.
Is the CU and operating unit included?
It is without CU and operating unit.
Which firmware release is stated for the configuration?
The configuration is released as of CU FW version V4.7 HF8.
