Product Description
Key Features
- Product identity: Product type designation: ECC 2x PWM ST. Product description: Technology modules for conductive AC charging of electric vehicles according to IEC 61851.
- Charging channels: Number of channels: 2; according to IEC 61851-1 Mode 3 and/or SAE J1772. The module has 2 Control Pilot outputs according to IEC 61851-1 and/or SAE J1772.
- Supply and mounting: Rated supply voltage: 24 V DC, with a permissible range from 19.2 V to 28.8 V DC. Mounting type: standard rail; mounting position: horizontal.
- Digital I/O: The module has 2 digital inputs and 2 transistor digital outputs, 1 per channel. Digital inputs are parameterizable for 12 V / 24 V; outputs are short-circuit proof.
- Firmware and engineering: Firmware version: V1.04; FW update possible: Yes. Configurable/integrated with STEP 7 TIA Portal from version V14 SP1.
- Protection and diagnostics: IP degree of protection: IP20. Diagnostic alarm and short-circuit diagnostics are available, with ERROR, PWR, channel status, and DIAG LEDs.
Applications
- Conductive AC charging of electric vehicles: The technology module is for conductive AC charging of electric vehicles according to IEC 61851.
Technical Summary
| Product type designation | ECC 2x PWM ST |
|---|---|
| Number of channels | 2; Acc. to IEC 61851-1 Mode 3 and/or SAE J1772 |
| Rated supply voltage | 24 V DC |
| Permissible supply voltage | 19.2 V to 28.8 V DC |
| Digital inputs | 2; 1 per channel |
| Digital outputs | 2; 1 per channel, transistor |
| Firmware version | V1.04 |
| Mounting type | standard rail |
| Mounting position | Horizontal |
| IP degree of protection | IP20 |
| Product lifecycle | Active Product |
Frequently Asked Questions
What product type matches order number 6FE1242-6TM10-0BB1?
The product type designation is ECC 2x PWM ST, supplied as a SIMATIC ET 200SP TM ECC module.
Which firmware version should be confirmed for this module?
The firmware version is V1.04, and an FW update is possible.
What I/O configuration should be checked?
The module has 2 digital inputs and 2 transistor digital outputs, with 1 input and 1 output per channel. It also has 2 Control Pilot outputs.
How is the module mounted and protected?
It uses standard-rail mounting in a horizontal position and has IP20 protection.
