Product Description
Key Features
- Exact module identity: Product type designation: AQ 2xI ST; SIMATIC ET 200SP analog output module, AQ 2xI Standard.
- Analog output capacity: 2 analog outputs with 0 to 20 mA, -20 mA to +20 mA and 4 mA to 20 mA output ranges.
- Resolution and response: Resolution with overrange: 16 bit; cycle time for all channels, min.: 1 ms; settling time: 0.1 ms for resistive load and 0.5 ms for inductive load.
- Supply and protection: Rated supply: 24 V DC; permissible range: 19.2 V to 28.8 V DC; reverse polarity protection: Yes.
- Interfaces and configuration: Usable BaseUnits: BU type A0, A1; compatible engineering versions include STEP 7 TIA Portal V13 SP1 and STEP 7 V5.5 SP3.
- Diagnostics and lifecycle: Module diagnostics, diagnostic alarm, wire-break and group-error diagnosis are supported. Firmware: V1.0.2; lifecycle: Active Product.
Technical Summary
| Product type designation | AQ 2xI ST |
|---|---|
| Analog outputs | 2 |
| Output ranges | 0 to 20 mA; -20 mA to +20 mA; 4 mA to 20 mA |
| Resolution with overrange | 16 bit |
| Cycle time (all channels), min. | 1 ms |
| Rated supply voltage (DC) | 24 V |
| Permissible supply range (DC) | 19.2 V to 28.8 V |
| Usable BaseUnits | BU type A0, A1 |
| Firmware version | V1.0.2 |
| Load impedance with current outputs, max. | 500 Ω |
| Product lifecycle | Active Product |
Frequently Asked Questions
What order number should be confirmed for this analog output module?
Confirm Siemens order number 6ES7135-6GB00-0BA1 and product type designation AQ 2xI ST.
Which BaseUnits can this module use?
It supports BU type A0 and A1.
What firmware version does the module have?
Firmware version: V1.0.2. FW update is possible: Yes.
Does the module support oversampling?
No. Analog output with oversampling: No.
