Product Description
Key Features
- Exact module identity: Electronics module for ET 200S, with 15 mm installation width and 1 count input.
- Count and measurement modes: Operating modes: Count and Measure, including cycle duration measurement with clock synchronization.
- Supply voltage: Load voltage L+ rated value: 24 V DC; permissible range: 20.4 V to 28.8 V DC. Reverse polarity protection: Yes.
- Digital I/O: 1 digital input and 1 digital output. The digital input supports gate control, synchronization, and latch function.
- Frequency and cycle measurement: Frequency measurement: 0.1 Hz to 100 kHz. Cycle duration measurement: 10 μs to 120 s.
- Product lifecycle: Product cancellation.
Technical Summary
| Product type | Electronics module for ET 200S |
|---|---|
| Load voltage L+ | 24 V DC; 20.4 V to 28.8 V DC permissible range |
| Digital inputs | 1; gate control, synchronization, latch function |
| Digital outputs | 1 |
| Frequency measurement | 0.1 Hz to 100 kHz |
| Cycle duration measurement | 10 μs to 120 s |
| Counter input | 1; 32 bit |
| Connectable encoders | 1 maximum; incremental encoder (asymmetrical), 24 V initiator, or 2-wire sensor |
| Installation | Module exchange during operation of the IM-DP: Yes; under process voltage: Yes |
| Protection | Reverse polarity protection and encoder-supply short-circuit protection: Yes |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
What order number should be confirmed for this Siemens module?
Confirm the complete order number 6ES7138-4DA04-0AB0 on the nameplate or installed-part documentation.
What supply voltage does 6ES7138-4DA04-0AB0 use?
Load voltage L+ is 24 V DC, with a permissible range of 20.4 V to 28.8 V DC.
How many digital inputs and outputs does the module have?
The module has 1 digital input and 1 digital output.
Which measurement ranges should be checked?
Frequency measurement is 0.1 Hz to 100 kHz, and cycle duration measurement is 10 μs to 120 s.
What lifecycle information is supplied for this configuration?
The supplied lifecycle information is Product cancellation. Confirm quantity, destination, and condition preference for the request.
