Product Description
Key Features
- Digital output configuration: Has 8 current-sourcing digital outputs with 2 A rated output current for signal "1" and electronic short-circuit protection per channel.
- Load voltage: Load voltages 1L+ and 2L+ are each rated at 24 V DC, with a permissible range of 20.4 V to 28.8 V and reverse polarity protection.
- PROFINET interfaces: Has 1 PROFINET interface with 100 Mbit/s full duplex, 2 4-pin D-coded M12 ports, and an integrated switch.
- Communication protocols: Supports PROFINET IO, EtherNet/IP, Modbus TCP, Open IE communication, MRP, and PROFINET system redundancy (S2).
- Diagnostics and protection: Provides wire-break and channel-by-channel short-circuit diagnostics, substitute values, diagnostic and maintenance alarms, and IP65/67/69K protection.
- Firmware and lifecycle: Firmware version is V5.1.x, firmware update is possible, and product lifecycle status is Active Product.
Applications
- Digital output switching: Provides digital output switching through 8 current-sourcing outputs with resistive, inductive, and lamp-load switching data.
Technical Summary
| Product lifecycle | Active Product |
|---|---|
| Digital outputs | 8 |
| Load voltage 1L+ | 24 V DC; 20.4 V to 28.8 V permissible range |
| Output current for signal "1" | 2 A rated value; 2 A permissible maximum |
| PROFINET interface | 1; 100 Mbit/s full duplex (100BASE-TX) |
| M12 ports | 2; 4-pin, D-coded |
| Supported protocols | PROFINET IO, EtherNet/IP, Modbus TCP |
| Firmware version | V5.1.x |
| Connections per device | 12 |
| Protection degree | IP65/67/69K |
Frequently Asked Questions
What order number should be confirmed for this Siemens module?
Confirm the complete order number 6ES7142-6BR00-0BB0 on the nameplate or installed-part documentation.
Which firmware version is supplied for 6ES7142-6BR00-0BB0?
The supplied firmware version is V5.1.x, and firmware update is possible.
Which I/O and interface configuration should be checked?
Check the 8 digital outputs, 2 4-pin D-coded M12 ports, 1 PROFINET interface, and supported EtherNet/IP and Modbus TCP protocols.
What lifecycle information is available for this configuration?
The product lifecycle status is Active Product.
