Product Description
Key Features
- Digital output configuration: 8 current-sourcing digital outputs with 0.5 A rated output current and electronic short-circuit protection per channel.
- PROFINET and Ethernet interfaces: 1 PROFINET interface with 100 Mbit/s full duplex, 2 D-coded 4-pin M12 ports, integrated switch, PROFINET IO, EtherNet/IP, and Modbus TCP.
- Supply and protection: Load voltage 1L+ and 2L+: 24 V DC rated, permissible range 20.4 V to 28.8 V, with reverse polarity protection.
- Communication functions: Shared device is supported with up to 2 IO Controllers, plus IRT, prioritized startup, MRP, S2 redundancy, SNMP, LLDP, and ARP.
- Diagnostics and substitute values: Substitute values are connectable; diagnostic and maintenance alarms are parameterizable, with wire-break and channel-by-channel short-circuit diagnostics.
- Physical and lifecycle identity: SIMATIC ET 200eco PN, M12-L, 8x M12, single and double assignment, IP65/67/69K protection, firmware V5.1.x, and Active Product status.
Applications
- Digital output control: Controls digital inputs and loads through 8 current-sourcing digital outputs with configurable substitute values.
Technical Summary
| Product | SIMATIC ET 200eco PN, DQ 8x 24 V DC/0.5 A, M12-L, 8x M12 |
|---|---|
| Digital outputs | 8; current-sourcing; IEC 61131 type 0.5 |
| Load voltage | 1L+ and 2L+: 24 V DC rated; 20.4 V to 28.8 V permissible |
| PROFINET interface | 1; 100 Mbit/s full duplex (100BASE-TX); 2 D-coded 4-pin M12 ports |
| Protocols | PROFINET IO, EtherNet/IP, Modbus TCP |
| Output current | 0.5 A rated and permissible maximum per output; 4 A maximum per module |
| Shared device | Up to 2 IO Controllers; up to 2 EtherNet/IP Scanners |
| Isochronous mode | 250 μs shortest clock pulse; 4 ms maximum cycle; 10 μs maximum jitter |
| Firmware | V5.1.x; FW update possible |
| Protection and lifecycle | IP65/67/69K; Active Product |
Frequently Asked Questions
What order number should be confirmed for this SIMATIC ET 200eco PN module?
Confirm the complete nameplate order number 6ES7142-6BG00-0BB0.
Which firmware version is supplied for 6ES7142-6BG00-0BB0?
Firmware version V5.1.x is supplied, and firmware updating is possible.
What I/O and connector configuration should be checked?
Check the 8 digital outputs, M12-L design, and 8x M12 configuration with 2 D-coded 4-pin M12 ports.
What lifecycle information is available for this exact item?
The supplied lifecycle status is Active Product; confirm quantity, destination, and condition preference for the request.
