Product Description
Key Features
- Digital input configuration: 8 digital inputs with 24 V DC rated input voltage, parameterizable input delay of 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms, and IEC 61131 type 3 input characteristic.
- PROFINET interface: 1 PROFINET interface with 2 M12, 4-pin, D-coded ports, integrated switch, and 100 Mbit/s full-duplex transmission.
- Communication protocols: Supports PROFINET IO Device, Open IE communication, EtherNet/IP, and Modbus TCP; PROFIsafe is not supported.
- Supply and encoder outputs: 24 V DC rated load voltage with a permissible range of 20.4 V to 28.8 V; 8 encoder supply outputs with 100 mA maximum output current per output.
- Protection and diagnostics: IP65/67/69K protection, channel diagnostics for wire break and encoder power supply short-circuit, and green, red, and yellow diagnostic LEDs.
Technical Summary
| Product lifecycle | Active Product |
|---|---|
| Digital inputs | 8 |
| Rated load voltage | 24 V DC |
| PROFINET interfaces | 1; 2 M12, 4-pin, D-coded ports |
| Transmission rate | 100 Mbit/s full duplex |
| Firmware version | V5.1.x |
| Firmware update possible | Yes |
| Protection | IP65/67/69K |
| Input delay | 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
| STEP 7 TIA Portal | STEP 7 V17 or higher with HSP 0363 |
| GSDML version | GSDML V2.4.x |
Frequently Asked Questions
What order number should be confirmed for this Siemens device?
Confirm the complete order number 6ES7141-6BG00-0BB0 on the nameplate or installed documentation.
Which firmware version is supplied for 6ES7141-6BG00-0BB0?
Firmware version: V5.1.x. Firmware update is possible.
What I/O and connector configuration should be checked?
Check 8 digital inputs, 2 M12, 4-pin, D-coded ports, and the 8 encoder supply outputs.
Which protection rating does this configuration have?
The degree of protection is IP65/67/69K.
