Product Description
Key Features
- Product identity: SIMATIC ET 200SP TM ECC PL ST load controller for conductive electric-vehicle charging in Mode 4 according to DIN SPEC 70121 and ISO 15118.
- Supply voltage: Rated supply voltage: 24 V DC; permissible range: 19.2 V to 28.8 V.
- I/O configuration: 1 channel, 0 digital inputs, 2 transistor digital outputs, 1 analog input, and 1 analog output.
- Charging interfaces: 1x Control Pilot including Powerline Green Phy, 1x Plug Present / Proximity Pilot, and 1x Digital Out TRIP function as open collector.
- Firmware and configuration: Firmware version: V1.1.13; FW update possible: Yes; configurable/integrated with STEP 7 V16 or higher.
- Installation and protection: Standard-rail mounting with horizontal or vertical mounting position; IP20 protection; short-circuit-proof outputs.
Applications
- Conductive electric-vehicle charging: The module supports conductive charging of electric vehicles in Mode 4 according to DIN SPEC 70121 and ISO 15118.
Technical Summary
| Product type | ECC PL ST |
|---|---|
| Supply voltage | 24 V DC; 19.2 V to 28.8 V permissible range |
| Channels | 1; according to IEC 61851-1 Mode 4 and DIN SPEC 70121 |
| Digital outputs | 2 transistor outputs; 1x TRIP open collector and 1x DQ P open collector |
| Analog input | 1; Plug Present according to IEC 61851 |
| Analog output | 1; Control Pilot including Powerline Green Phy, according to DIN SPEC 70121 |
| Firmware version | V1.1.13 |
| Configuration | STEP 7 V16 or higher |
| Mounting | Standard rail; horizontal or vertical |
| Protection | IP20; short-circuit-proof outputs |
| Usable BaseUnits | BU type B0, B1 |
| Lifecycle | Active Product |
Frequently Asked Questions
What order number should be confirmed for this SIMATIC ET 200SP module?
Confirm Siemens order number 6FE1242-6TM20-0BB1 and product type ECC PL ST.
Which firmware version does the module have?
Firmware version is V1.1.13, and FW update is possible.
What I/O configuration should be checked?
Check 1 channel, 2 transistor digital outputs, 1 analog input, and 1 analog output.
Which mounting details should be confirmed?
Confirm standard-rail mounting and the required horizontal or vertical mounting position.
