Product Description
Key Features
- Product identity: Product type designation: IM 153-2 DP HF for ET 200M.
- Module capacity: Supports up to 12 S7-300 modules per DP device interface, with redundancy capability.
- Supply voltage: Rated supply: 24 V DC; permissible range: 20.4 V to 28.8 V DC.
- PROFIBUS DP interface: RS 485 transmission up to 12 Mbit/s, with automatic transmission-rate detection and a 9-pin sub D socket.
- Firmware and configuration: Firmware version: V6.0.0. Configuration is supported via STEP 7, COM PROFIBUS, or non-Siemens tools via GSD file SI05801E.GSG.
- Physical and protection data: Dimensions: 40 mm × 125 mm × 117 mm; approximate weight: 360 g; IP20 protection.
Technical Summary
| Product type designation | IM 153-2 DP HF |
|---|---|
| Firmware version | V6.0.0 |
| Rated supply voltage | 24 V DC |
| Permissible supply voltage | 20.4 V to 28.8 V DC |
| Modules per DP device interface, max. | 12 |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| Connection design | 9-pin sub D socket |
| Bus protocol | PROFIBUS DP to EN 50170 |
| GSD file | SI05801E.GSG |
| Protection | IP20 |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
What order number identifies this Siemens module?
The order number is 6ES7153-2BA10-0XB0, with product type designation IM 153-2 DP HF.
Which firmware version does the module have?
The firmware version is V6.0.0.
What supply and connector details should be confirmed?
The rated supply is 24 V DC, the permissible range is 20.4 V to 28.8 V DC, and the connection is a 9-pin sub D socket.
Does the module support TCP/IP?
No. TCP/IP is not supported; the bus protocol is PROFIBUS DP to EN 50170.
What lifecycle information applies to this configuration?
The product lifecycle is Product cancellation. Confirm quantity, destination, and condition preference for a legacy-part verification inquiry.
