Product Description
Key Features
- Exact product identity: SIPLUS ET 200SP AI 4xI 2-wire HART based on 6ES7134-6TD00-0CA1, with conformal coating and color code CC03.
- Analog input capacity: 4 differential analog inputs, all for current measurement; the 4 mA to 20 mA input range is supported with 15 bit + sign.
- Supply and encoder output: Rated supply is 24 V DC, with a permissible range of 19.2 V to 28.8 V DC. Encoder supply is 24 V with short-circuit protection.
- Measurement and diagnostics: Resolution is 16 bit with integrating Sigma-Delta measurement. Channel diagnostics, diagnostic and limit value alarms, wire-break, short-circuit, group error, and overflow/underflow diagnoses are supported.
- Mounting and dimensions: Suitable for BU type A0 and A1, with mechanical coding element Type A. Dimensions are 15 mm wide, 73 mm high, and 58 mm deep.
- Lifecycle and environmental data: Lifecycle status is Active Product. Operating temperature is -40 °C to 60 °C for horizontal installation, with the stated mounting conditions and start-up at -30 °C.
Applications
- 2-wire current measurement: The module supports current measurement using 2-wire transducers on its analog inputs.
Technical Summary
| Product type | AI 4xI 2-wire HART |
|---|---|
| Order number | 6AG1134-6TD00-2CA1 |
| Based on | 6ES7134-6TD00-0CA1 |
| Analog inputs | 4; Differential inputs |
| Supported input range | 4 mA to 20 mA; 15 bit + sign |
| Supply voltage | 24 V DC; permissible range 19.2 V to 28.8 V DC |
| Resolution | 16 bit |
| Input resistance | 280 Ω; + approx. 0.35 V diode forward voltage |
| Usable BaseUnits | BU type A0, A1 |
| Product lifecycle | Active Product |
Frequently Asked Questions
Which order number should be confirmed for this Siemens SIPLUS module?
Confirm order number 6AG1134-6TD00-2CA1 on the nameplate or installed-part record.
What input configuration does 6AG1134-6TD00-2CA1 have?
It has 4 differential analog inputs for current measurement and supports 4 mA to 20 mA 2-wire transducers.
Which BaseUnits are usable with this module?
The usable BaseUnits are BU type A0 and A1.
What firmware information should be checked?
FW update is possible; the module is based on 6ES7134-6TD00-0CA1.
