Product Description
Key Features
- Exact product identity: Bus cable for ET connection M8, Siemens 6ES7194-2LH50-0AC0.
- Cable and connector: Flexible 4-core shielded cable, preassembled at one end with 1x 4-pin M8 plug.
- ET-CONNECTION suitability: For connecting ET-CONNECTION nodes, e.g. SIMATIC ET 200AL, in degree of protection IP65/67.
- Cable construction: Cable designation: 2Y(ST)CY 1x4x0.5/1.0-100-GN; shield: overlapped aluminum-clad foil sheathed in a braid of tin-plated copper wires.
- Bending performance: 1 000 000 bending cycles; cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s2.
- Installation and materials: 180° cable outlet, green PVC cable sheath, PE core insulation, silicone-free, and not halogen-free.
Applications
- Connecting ET-CONNECTION nodes: Used for connecting ET-CONNECTION nodes, e.g. SIMATIC ET 200AL, in degree of protection IP65/67.
Technical Summary
| Product type | Bus cable |
|---|---|
| Connector | 1x M8 plug, 4-pin, preassembled at one end |
| Number of electrical cores | 4 |
| IP degree of protection | IP65/67 |
| Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN |
| Permissible bending radius, single bend, min. | 20 mm |
| Permissible bending radius, multiple bends, min. | 40 mm |
| Bending radius for continuous bending | 100 mm |
| Ambient temperature during assembly | -30 °C to 80 °C |
| Silicone-free | Yes |
| Halogen-free | No |
Frequently Asked Questions
What connector configuration does Siemens 6ES7194-2LH50-0AC0 have?
It has 1x 4-pin M8 plug preassembled at one end.
What bending radius should be confirmed for this cable?
The minimum permissible bending radius is 20 mm for a single bend and 40 mm for multiple bends; continuous bending uses a 100 mm radius.
What should be checked when requesting this exact cable?
Confirm the order number 6ES7194-2LH50-0AC0, the M8 connector configuration, required quantity, destination, and condition preference.
