Product Description
Key Features
- SIMATIC DP module identity: Electronics module 2 AO U High Feature for ET 200S, with 15 mm width and 0.5 ms cycle time per module.
- Analog voltage outputs: Has 2 analog outputs with 1 V to 5 V, -5 V to +5 V and -10 V to +10 V output ranges.
- Load voltage and protection: Rated load voltage L+ is 24 V DC. Reverse polarity protection and voltage-output short-circuit protection are provided.
- Output performance: Voltage-output short-circuit current is max. 25 mA. Load impedance with voltage outputs is min. 1 kΩ; capacitive load is max. 0.5 μF.
- Connections and installation: Supports two-wire and four-wire actuator connections. Maximum shielded cable length is 200 m, or 100 m if Twa < 2 ms.
- Lifecycle status: Product cancellation applies to this product.
Technical Summary
| Product function | Isochronous mode: Yes |
|---|---|
| Analog outputs | 2 |
| Rated load voltage L+ | 24 V DC |
| Output ranges | 1 V to 5 V; -5 V to +5 V; -10 V to +10 V |
| Cycle time (all channels) max. | 0.5 ms; At max. 0.5 μF |
| Resolution with overrange (bit including sign), max. | 16 bit; 15 bit + sign |
| Load impedance with voltage outputs, min. | 1 kΩ |
| Capacitive load, max. | 0.5 μF |
| Actuator connections | Two-wire and four-wire connection for voltage output |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
What order number should be confirmed for this SIMATIC DP module?
Confirm order number 6ES7135-4LB02-0AB0 and the ET 200S 2 AO U High Feature identity.
Which output ranges and resolution does 6ES7135-4LB02-0AB0 support?
It supports 1 V to 5 V, -5 V to +5 V and -10 V to +10 V output ranges. Resolution with overrange is max. 16 bit; 15 bit + sign.
Which actuator connections are supported?
The module supports two-wire and four-wire connections for voltage output actuators.
What configuration should be checked for this product?
Check the 2 analog voltage outputs, 15 mm width, 24 V DC rated load voltage and product cancellation status.
