Product Description
Key Features
- Communication identity: ET 200SP CM 1x CAN ST module with one CAN interface for CAN and CANopen networks.
- CAN operating modes: Supports CAN Standard CAN 2.0A/B and CANopen Manager / Slave according to CiA 301 & CiA 302.
- Supply and protection: Rated supply voltage: 24 V DC; permissible range: 19.2 V to 28.8 V DC; reverse polarity protection: Yes; IP20.
- Connection and isolation: Connection design: Push-in terminal. The interface is isolated from the backplane bus and isolated with 500 V AC or 707 V DC; isolation test: 707 V DC (type test).
- Firmware and engineering: Firmware version: V1.2.x; FW update possible: Yes; configurable/integrated in STEP 7 TIA Portal from STEP 7 V15.1 or higher.
- Lifecycle and installation: Product lifecycle: Active Product. Usable BaseUnits: BU type A0; module swapping during operation: Yes.
Applications
- CAN network gateway: Provides a CM CAN gateway to CAN or CANopen networks.
- CANopen Manager operation: Operates as a CANopen Manager according to CiA 301/302.
- CANopen Slave operation: Operates as a CANopen Slave according to CiA 301/302.
Technical Summary
| Product model | 6ES7137-6EA00-0BA0 |
|---|---|
| Product type designation | CM 1x CAN ST |
| Interface type | CAN according to CiA 303-1 |
| CAN operating modes | CAN Standard CAN 2.0A/B; CANopen Manager / Slave acc. to CiA |
| CAN specification | CiA 301 & CiA 302 |
| Supply voltage | 24 V DC; permissible range 19.2 V to 28.8 V DC |
| Transmission rate | 10 kbit/s to 1 000 kbit/s |
| Connection design | Push-in terminal |
| Firmware version | V1.2.x |
| Usable BaseUnits | BU type A0 |
| Product lifecycle | Active Product |
Frequently Asked Questions
What order number should be confirmed for this CM CAN module?
Confirm the complete order number 6ES7137-6EA00-0BA0 and product type CM 1x CAN ST.
Which CAN and CANopen functions does it support?
It supports CAN Standard CAN 2.0A/B, CANopen Manager and CANopen Slave according to CiA 301 & CiA 302.
What firmware and engineering version are specified?
Firmware version is V1.2.x, FW update is possible, and configuration is supported in STEP 7 TIA Portal from STEP 7 V15.1 or higher.
What connection and supply details should be checked?
Check the Push-in terminal connection and 24 V DC supply; the permissible range is 19.2 V to 28.8 V DC.
