Product Description
Key Features
- Exact product identity: Product type designation: DQ 8x24VDC/0.5A BA; SIMATIC ET 200SP digital output module.
- Digital output capacity: 8 parameterizable digital outputs with PNP current-sourcing; current-sinking is not supported.
- Output load rating: Output current for signal "1": 0.5 A rated and 0.5 A maximum permissible; maximum module current is 4 A.
- Supply and protection: Rated supply voltage: 24 V DC, with a permissible range of 19.2 V to 28.8 V and reverse polarity protection.
- Diagnostics and substitute values: The module supports diagnostics, diagnostic alarms, supply-voltage monitoring, group error reporting, and connectable substitute values.
- BaseUnit and identification: Usable BaseUnit: BU type A0. Color code: CC02; automatic encoding and a Type A mechanical coding element are provided.
Applications
- Digital input control: The module can control a digital input.
Technical Summary
| Product type designation | DQ 8x24VDC/0.5A BA |
|---|---|
| Digital outputs | 8 |
| Output type | Source output (PNP, current-sourcing) |
| Rated supply voltage | 24 V DC |
| Permissible supply voltage | 19.2 V to 28.8 V DC |
| Output current for signal "1" | 0.5 A rated value; 0.5 A permissible maximum |
| Maximum module current | 4 A |
| Usable BaseUnit | BU type A0 |
| PROFINET GSD version/GSD revision | GSDML V2.3 |
| Firmware version | V0.0 |
| Product lifecycle | Active Product |
Frequently Asked Questions
What exact order number should be confirmed for this digital output module?
Confirm the complete order number 6ES7132-6BF01-0AA0 and product type designation DQ 8x24VDC/0.5A BA.
Which BaseUnit is specified for 6ES7132-6BF01-0AA0?
The usable BaseUnit is BU type A0. It is specified for 1-wire and 2-wire connections; 3-wire connection uses BU type A0 with AUX terminals or a potential distributor module, while 4-wire connection uses BU type A0 plus a potential distributor module.
What firmware and engineering versions are supplied for verification?
Firmware version is V0.0 and firmware updates are not possible. STEP 7 TIA Portal is configurable/integrated from V14, and STEP 7 from V5.5 SP3.
What configuration details should be confirmed for a legacy-part request?
Confirm the installed order number, firmware version, BaseUnit and connection variant, required quantity, destination, and preferred condition.
