Product Description
Key Features
- Exact product identity: SIPLUS ET 200SP DI 8x NAMUR HF TX rail based on 6ES7131-6TF00-0CA0, with conformal coating and color code CC01.
- Digital input capacity: 8 parameterizable digital inputs; above +60 °C, a maximum of 4 inputs can be controlled simultaneously, with no adjacent points.
- NAMUR encoder supply: 8.2 V supply with short-circuit protection, 8 mA maximum output current per channel, and 64 mA maximum per module.
- Counter operation: Counter function with up to 4 counters, 5 kHz maximum counting frequency, 32 bit counting width, and selectable up/down counting direction.
- Diagnostics and interrupts: Channel-by-channel wire-break and short-circuit diagnostics, channel-by-channel diagnostic alarms, and parameterizable hardware interrupts on channels 0 to 7.
- Installation and configuration: Suitable for BU type A0 with 2-wire or 3-wire connection; shielded cable length up to 200 m, or 50 m in Counter mode.
Applications
- NAMUR signal input: Accepts signals from NAMUR encoders and changeover contacts, including contacts connected with 10 kΩ.
- Counter operation: Performs parameterizable counter functions with up/down counting and a maximum counting frequency of 5 kHz.
Technical Summary
| Product type | DI 8xNAMUR HF |
|---|---|
| Supply voltage, rated value | 24 V DC |
| Digital inputs | 8; above +60 °C, maximum 4 simultaneously controllable inputs, no adjacent points |
| NAMUR encoder supply | 8.2 V; short-circuit protected |
| Output current per channel, max. | 8 mA |
| Counting frequency, max. | 5 kHz |
| Firmware update | Yes |
| Usable BaseUnit | BU type A0 |
| PROFINET R1 IM operation | Yes |
| Lifecycle | Active Product |
Frequently Asked Questions
What order number should be confirmed for this SIPLUS ET 200SP input module?
Confirm the complete order number 6AG2131-6TF00-4CA0 and the DI 8xNAMUR HF product type designation.
Which BaseUnit and connection variants are supported?
The module is suitable for BU type A0 with 2-wire or 3-wire connection.
What firmware information should be checked?
FW update is possible; the module is based on 6ES7131-6TF00-0CA0.
What diagnostics are available?
It has channel-by-channel wire-break and short-circuit diagnostics, diagnostic alarms, and parameterizable hardware interrupts on channels 0 to 7.
