Product Description
Key Features
- SIMATIC DP electronic module: The module has 4 transistor digital outputs and supports isochronous mode.
- 24 V DC load voltage: Rated load voltage L+ is 24 V from the power module.
- Output capacity: Output current for signal "1" has a rated value of 0.5 A, with a permissible range from 7 mA to 600 mA.
- Diagnostics: The outputs have short-circuit protection, module-wise short-circuit diagnosis, and an SF red group error LED.
- Physical configuration: The module has 15 mm width, 81 mm height, 52 mm depth, and approximately 40 g weight.
- Lifecycle: Product lifecycle: Product cancellation.
Technical Summary
| Product function | Isochronous mode: Yes |
|---|---|
| Digital outputs | 4 transistor outputs |
| Rated load voltage L+ | 24 V; From power module |
| Output current for signal "1", rated value | 0.5 A |
| Output current for signal "1", permissible range | 7 mA to 600 mA |
| Short-circuit protection | Yes |
| Output delay, resistive load | "0" to "1", max. 100 μs; "1" to "0", max. 300 μs |
| Potential separation | Between the channels: No; between the channels and backplane bus: Yes |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
Which order number should be confirmed for this module?
Confirm the complete order number 6ES7132-4BD00-0AB0.
What output configuration does this module have?
It has 4 transistor digital outputs with a 0.5 A rated output current for signal "1".
Does it provide short-circuit diagnostics?
Yes. It has short-circuit protection, module-wise short-circuit diagnosis, and an SF red group error LED.
Are the digital outputs electrically isolated from each other?
No, the channels are not electrically isolated from each other. They are isolated from the backplane bus.
Can two outputs be switched in parallel for uprating?
No. Parallel switching of two outputs for uprating is not supported.
