Product Description
Key Features
- SIMATIC DP ET 200S identity: Electronics module with 2AI High Speed I-4WIRE 4–20 mA for 4-wire transmitters; width: 15 mm.
- Analog input capacity: 2 analog inputs with a maximum cycle time of 250 μs when all channels are active.
- Input ranges and resolution: Rated current input ranges: 0 to 20 mA, -20 mA to +20 mA, and 4 mA to 20 mA; resolution with overrange: 16 bit maximum.
- Load voltage and protection: Load voltage L+: 24 V DC rated value, with short-circuit protection and reverse polarity protection.
- Diagnostics and indication: Hardware interrupt and readable diagnostic information; wire-break diagnosis applies to the 4 to 20 mA measuring range only, with SF group-error LED.
- Physical dimensions and weight: Dimensions: 15 mm width, 81 mm height, 52 mm depth; weight: approximately 45 g.
Technical Summary
| Product lifecycle | Product cancellation |
|---|---|
| Product function | Isochronous mode: Yes |
| Analog inputs | 2 |
| Input ranges | 0 to 20 mA; -20 mA to +20 mA; 4 mA to 20 mA |
| Resolution with overrange | 16 bit maximum |
| Cycle time | 250 μs maximum, all channels active |
| Load voltage L+ | 24 V DC rated value |
| Encoder supply | 2 outputs, 24 V output voltage |
| Input resistance | 106 Ω for 0 to 20 mA |
| Potential separation | Between analog channels and backplane bus: Yes; between channels and load voltage L+: Yes |
Frequently Asked Questions
What order number should be confirmed for this SIMATIC DP module?
Confirm the complete order number: 6ES7134-4GB62-0AB0.
Which input ranges and resolution does the module have?
It has rated current input ranges of 0 to 20 mA, -20 mA to +20 mA, and 4 mA to 20 mA, with 16 bit maximum resolution with overrange.
What supply and protection data should be checked?
Load voltage L+ is 24 V DC rated value, with short-circuit protection and reverse polarity protection.
What diagnostic configuration is supplied?
The module has hardware interrupt and readable diagnostic information. Wire-break diagnosis applies to the 4 to 20 mA measuring range only, and group error is indicated by the red SF LED.
What lifecycle information is supplied for this configuration?
The supplied lifecycle data is Product cancellation.
