Product Description
Key Features
- Exact module identity: Product type designation: CM 1xDALI; color code: CC20.
- DALI capacity: Supports up to 64 DALI control gears and 63 control devices.
- Integrated DALI supply: Integrated DALI bus power supply with 160 mA minimum and 250 mA maximum supply current; it can be switched off.
- Supply and protection: Rated supply: 24 V DC; permissible range: 19.2 V to 28.8 V DC; reverse polarity protection: Yes.
- Engineering interfaces: Configurable/integrated with STEP 7 V15.1 or higher; PROFIBUS uses GSD Revision 5 and PROFINET uses GSDML V2.34.
- Installation and diagnostics: Suitable for BU type U0, with maximum DALI cable length of 300 m, DALI bus short-circuit diagnosis, diagnostic alarm, and green PWR, RxD, and TxD LEDs.
Applications
- DALI device control: Controls DALI operating devices including fluorescent lamps, emergency lighting with single battery, discharge lamps, low-voltage halogen lamps, incandescent lamps, direct voltage, LED modules, switching functions, and color control.
- DALI input device support: Supports DALI pushbuttons, absolute input devices, presence detectors, light sensors, and further input devices of the general device type.
Technical Summary
| Product lifecycle | Active Product |
|---|---|
| Product type designation | CM 1xDALI |
| DALI capacity | Up to 64 DALI control gears; 63 control devices |
| Supply voltage, rated value (DC) | 24 V |
| DALI supply current | 160 mA min.; 250 mA max. |
| Engineering | STEP 7 V15.1 or higher; PROFIBUS GSD Revision 5; PROFINET GSDML V2.34 |
| Suitable BaseUnit | BU type U0 |
| Firmware update possible | Yes |
| DALI standard | DALI V2 Multi-Master |
Frequently Asked Questions
What exact order number should be confirmed for this DALI module?
Confirm the complete order number 6ES7137-6CA00-0BU0 and product type designation CM 1xDALI.
Which BaseUnit is suitable for this module?
The module is suitable for BU type U0.
What supply data should be checked?
Check the 24 V DC rated supply and the permissible range of 19.2 V to 28.8 V DC.
What DALI capacity and cable length should be verified?
Verify support for up to 64 DALI control gears and 63 control devices, with a maximum DALI cable length of 300 m.
Which engineering versions and interfaces should be confirmed?
Confirm STEP 7 V15.1 or higher, PROFIBUS GSD Revision 5, and PROFINET GSDML V2.34.
