Product Description
Key Features
- Exact product identity: SIPLUS ET 200SP DI 8×24 V DC HF based on 6ES7131-6BF00-0CA0, with conformal coating and -40…+70 °C.
- Digital input capacity: 8 parameterizable digital inputs with P-reading sourcing/sinking input and an IEC 61131 type 3 input characteristic curve.
- Supply and protection: Rated supply voltage: 24 V DC; permissible range: 19.2 V to 28.8 V DC; reverse polarity protection: Yes.
- Diagnostics and indicators: Channel-by-channel diagnostic alarms, wire-break and short-circuit diagnostics, supply voltage monitoring, and green/red DIAG LED.
- Installation and connections: Suitable BaseUnit: BU type A0. 1-wire and 2-wire connections use BU type A0; 3-wire connection uses BU type A0 with AUX terminals or a potential distributor module; 4-wire connection uses BU type A0 + Potential distributor module.
- Firmware and lifecycle: Firmware version: V2.0; FW update possible: Yes. Product lifecycle: Active Product.
Applications
- Digital signal acquisition: Acquires digital input signals through 8 parameterizable inputs.
- Channel diagnostics: Provides channel-by-channel diagnostic alarms, wire-break diagnostics, and short-circuit diagnostics.
- Edge evaluation: Evaluates rising edges, falling edges, and edge changes.
Technical Summary
| Product type | DI 8×24 V DC HF |
|---|---|
| BaseUnit | BU type A0 |
| Digital inputs | 8 |
| Rated supply voltage | 24 V DC |
| Permissible supply voltage | 19.2 V to 28.8 V DC |
| Firmware version | V2.0 |
| Input characteristic | IEC 61131, type 3 |
| Diagnostic alarms | Yes; channel by channel |
| Protection | Conformal coating; -40…+70 °C |
| Product lifecycle | Active Product |
Frequently Asked Questions
What exact order number should be confirmed for this module?
Confirm order number 6AG1131-6BF00-7CA0 and product type DI 8×24 V DC HF.
Which firmware version is supplied?
The firmware version is V2.0, and FW update is possible.
Which BaseUnit and connection variants are supported?
The suitable BaseUnit is BU type A0. 1-wire and 2-wire connections use BU type A0; 3-wire connection uses BU type A0 with AUX terminals or a potential distributor module; 4-wire connection uses BU type A0 + Potential distributor module.
What diagnostics are available?
The module has channel-by-channel diagnostic alarms, supply voltage monitoring, encoder power supply monitoring, wire-break diagnostics, and short-circuit diagnostics.
