Product Description
Key Features
- Digital input capacity: 8 parameterizable digital inputs with P-reading and an input characteristic curve in accordance with IEC 61131, type 3.
- 24 VDC input signals: Rated input voltage is 24 VDC; signal "0" is -30 to +5 V and signal "1" is +11 to +30 V.
- Input delay settings: Parameterizable delay values are 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms, each with an additional delay of 30 to 500 μs depending on line length.
- Diagnostics and status: The module has diagnostic alarms, supply-voltage monitoring, encoder-power-supply monitoring, module-wise wire-break and short-circuit diagnostics, and green PWR, channel-status, and green/red DIAG LEDs.
- BaseUnit and configuration: It uses BU type A0 for 1-wire and 2-wire connections; 3-wire connections require BU type A0 with AUX terminals or a potential distributor module, while 4-wire connections require BU type A0 plus a potential distributor module.
Applications
- Digital signal input: Accepts digital signals through 8 parameterizable 24 VDC inputs.
- Module diagnostics: Provides monitoring and diagnostic information for supply voltage, encoder power supply, wire breaks, and short circuits.
Technical Summary
| Product type | DI 8×24 VDC ST |
|---|---|
| Input capacity | 8 digital inputs |
| Rated input voltage | 24 VDC |
| Input signal "0" | -30 to +5 V |
| Input signal "1" | +11 to +30 V |
| Input delay | 0.05 to 20 ms, with parameterizable values and an additional delay of 30 to 500 μs depending on line length |
| Firmware version | V0.0 |
| Usable BaseUnit | BU type A0 |
| PROFINET GSD version | GSDML V2.3 |
| Lifecycle | Active Product |
Frequently Asked Questions
Is 6ES7131-6BF01-0BA0 the correct order number for this module?
Yes. The product name is 6ES7131-6BF01-0BA0 and the product type designation is DI 8×24 VDC ST.
Which firmware version does the module have?
The firmware version is V0.0, and a firmware update is not possible.
Which BaseUnit is used for connection?
BU type A0 is used for 1-wire and 2-wire connections. A 3-wire connection requires BU type A0 with AUX terminals or a potential distributor module; a 4-wire connection requires BU type A0 plus a potential distributor module.
What lifecycle status should be confirmed for this item?
The lifecycle status is Active Product.
