Product Description
Key Features
- Charging controller identity: SIPLUS ET 200SP TM ECC 2xPWM ST based on 6FE1242-6TM10-0BB1, with conformal coating and 2 channels for conductive AC charging control according to IEC 61851.
- Charging interfaces: 2 Control Pilot channels, 2 plug-present inputs, 2 DQ switching contacts for load contactors as open collectors, 2 feedback DIs, and 2 ACT outputs for connector interlock.
- Supply and outputs: 24 V DC rated supply with a permissible range of 19.2 V to 28.8 V; 2 transistor digital outputs and 2 analog outputs for Control Pilot according to IEC 61851-1 and/or SAE J1772.
- Installation and protection: Standard-rail mounting in a horizontal position, with IP20 protection and reverse-polarity protection against destruction.
- Firmware and engineering: Firmware update possible; configurable/integrated with STEP 7 TIA Portal from the version identified by entry ID: 109746275.
Applications
- Conductive AC charging control: Controls conductive AC charging according to IEC 61851, including load contactor or connector-lock control.
Technical Summary
| Product type | ECC 2x PWM ST |
|---|---|
| Product lifecycle | Active Product |
| Channels | 2; According to IEC 61851/SAE J1772 |
| Supply voltage | 24 V DC rated; permissible range 19.2 V to 28.8 V |
| Digital inputs | 2; 1 per channel |
| Digital outputs | 2 transistor outputs; 1 per channel |
| Analog outputs | 2; Control Pilot acc. to IEC 61851-1 and/or SAE J1772 |
| Output switching capacity | 1.3 A max. with resistive load |
| Mounting | Standard rail; horizontal |
| Protection | IP20 |
| Operating temperature | -30 °C to 60 °C; horizontal installation |
Frequently Asked Questions
What is the exact order number and product type?
The exact order number is 6AG1242-6TM10-2BB1, and the product type is ECC 2x PWM ST.
What supply voltage does this module use?
It uses a 24 V DC rated supply, with a permissible range of 19.2 V to 28.8 V.
How many charging-control channels and digital I/O points are provided?
It has 2 channels, 2 digital inputs, 2 transistor digital outputs, and 2 analog outputs for Control Pilot according to IEC 61851-1 and/or SAE J1772.
How is the module mounted?
It is mounted on a standard rail in a horizontal position.
