Product Description
Key Features
- Exact module identity: SIMATIC DP electronics module for ET200S, 2AI Standard, 15 mm width.
- Analog input capacity: 2 analog inputs for 4 mA to 20 mA current input; input range is supported on 50 ohms.
- Resolution and conversion: 13 bit resolution with overrange; conversion time is 65 ms per channel.
- Supply and protection: Rated load voltage L+ is 24 V DC from the power module; reverse polarity protection has a destruction limit of 35 mA per channel.
- Diagnostics and isolation: Wire break, group error, and overflow/underflow diagnostics are available. The analog inputs are separated from the backplane bus, but not from each other.
- Lifecycle status: Product cancellation.
Applications
- Current measurement: Current measurement as a 2-wire transducer with a maximum 750 Ω burden.
Technical Summary
| Product type | SIMATIC DP electronics module for ET200S, 2AI Standard |
|---|---|
| Analog inputs | 2 |
| Input range | 4 mA to 20 mA |
| Resolution | 13 bit; 4 to 20 mA: 13 bit |
| Conversion time | 65 ms per channel; 55 / 65 ms |
| Load voltage L+ | 24 V DC; from power module |
| Diagnostics | Wire break, group error, overflow/underflow |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
What exact module should be confirmed for this request?
Confirm Siemens 6ES7134-4GB01-0AB0, SIMATIC DP electronics module for ET200S, 2AI Standard, 15 mm width.
What input signal does the module accept?
It accepts a 4 mA to 20 mA current input for a 2-wire transducer, with a maximum 750 Ω burden.
What supply does the module require?
The rated load voltage L+ is 24 V DC from the power module.
What diagnostics should be checked during model verification?
Check wire break, group error, overflow/underflow, and the group error SF red LED indication.
