Product Description
Key Features
- Exact product identity: AI Energy Meter RC HF analog input module for SIMATIC ET 200SP, with channel diagnostics and support for BU type U0.
- Measurement functions: Measures voltage, current, energy, frequency, active power, reactive power, power factor, line analysis, harmonics, voltage dips, and voltage swells.
- Input interfaces: Supports Rogowski coils and a 333 mV current-voltage-converter interface; current measurement supports up to 4.
- Supply and installation: Rated supply is 24 V DC; permissible supply range is 19.2 V to 28.8 V DC. Mounting position is any.
- Engineering and communication: STEP 7 TIA Portal is configurable/integrated from V16 or higher with HSP; PROFINET uses GSD V2.3 and PROFIBUS uses GSD revisions 3 and 5 or higher.
- Firmware and diagnostics: Firmware version is V8.0, FW update is possible, and the module provides diagnostic alarms, limit value alarms, hardware interrupts, and channel diagnostics.
Applications
- Energy measurement: Measures energy, active power, reactive power, power factor, active energy, and reactive energy.
- Line analysis: Performs line analysis including harmonics, THD measurement for current and voltage, voltage dips, and voltage swells.
Technical Summary
| Product type | AI Energy Meter RC HF |
|---|---|
| Firmware version | V8.0 |
| Supply voltage | 24 V DC; permissible range 19.2 V to 28.8 V DC |
| Usable BaseUnit | BU type U0 |
| Current measurement | Yes; Max. 4 |
| Input interface | Rogowski coil or 333 mV current-voltage-converter interface |
| Cycle time | 50 ms; time for consistent update of all measured and calculated values, cyclic and acyclic data |
| Communication | PROFINET GSD V2.3; PROFIBUS GSD revisions 3 and 5 or higher |
| Product lifecycle | Active Product |
Frequently Asked Questions
What order number should be confirmed for this AI Energy Meter RC HF module?
Confirm the complete nameplate order number: 6ES7134-6PA21-0CU0.
Which firmware version and update option does this module have?
The firmware version is V8.0, and an FW update is possible.
Which BaseUnit and input interface should be confirmed?
Confirm BU type U0 and whether the installed configuration uses a Rogowski coil or a 333 mV current-voltage-converter interface.
